Heatless regenerative regenerative desiccant dyer

Quick Details

Place of Origin:Shanghai, China (Mainland)
Brand Name:HX
Model Number:75HD
Type:Air Dryer
Product:Heatless regenerative regenerative desiccant dyer
Air consumption rate:?14.5%
Control method:PLC
Design pressure:1.0Mpa
Treatment capacity:8.5 M3 /min
Size:1010*700*1727mm
Air outlet dewpoint:-70C (PDP)
Switching cycle:5-10minitues (adjustable)
Design inlet temperature:45C
Allocation of available:1.Dewpoint switch mode 2.Alarm of high dewpoint,interlock

Packaging & Delivery

Packaging Details:	corrugated carton or wooden case
Delivery Detail:	within 7 days after your payment

Specifications

1-Heatless regenerative air compressor air dryer
2-OEM for KOBELCO.
3-Energy saving,cost efficiently

Brief Introduction of Heatless regenerative regenerative desiccant dyer

Heatless regenerative air compressor air dryer is based on pressure swing adsorption. The

adsorption system can be understood that it happens under the van der Waals force, during high water vapor pressure adsorption processes, the van der Waals force of moist air is less than desiccant, it means its keeping moisture ability is less than desiccant, the rate of desiccant water adsorption is faster than desorption. As the adsorption goes on, the adsorbate density of adsorbent surface increased gradually, the adsorption rate is slower and slower, meanwhile the rate of desorption is faster and faster. When the adsorption rate is equal to the desorption rate, the adsorption equilibrium reaches. Similarly, pressure swing adsorption technology is used in desorption process, desorption gas uses the dry gas of the dryer outlet and reduces pressure in throttling process, now, the partial pressure of water vapor is far less than saturated vapor pressure, there’ll be a trend for the air absorbs moisture to improve water vapor partial pressure, thus the absorbed moisture of adsorbent completes desorption, then enters next adsorption cycle, desorption and adsorption process can be simply understood as a "tug of war" between adsorbent (alumina) and adsorbate carrier (air). As resurgent and original gas are homologous, its structure is very simple and easy to operate. It is quite suitable for the post-processing of small and medium-sized air compressor.

Type Code	Type category
N(P)F	Room Temp. Air-cooled Refrigerated Air Dryer (P=stainless steel plate)
G(P)F	High Temp. Air-cooled Refrigerated Air Dryer (P=stainless steel plate)
N(P)W	Room Temp. Water-cooled Refrigerated Air Dryer (P=stainless steel plate)
G(P)W	High Temp. Water-cooled Refrigerated Air Dryer (P=stainless steel plate)
HD	Heatless Regenerative Adsorption Air Dryer
ED	Eupyrexia Regenerative Adsorption Air Dryer
XC	Blowing Regenerative Adsorption Air Dryer
XB	Waste Heat Regeneration type Adsorption Air Dryer
MF	Air-cooled Combined Low Dew Point Air Dryer
MW	Water-cooled Combined Low Dew Point Air Dryer
Special type 1	Explosion-proof Air Dryer
Special type 2	Low Pressure Gas Protection Dryer
Special type 3	High pressure air dryer

Our advantage:

We are specialized in manufacturing compressed air treatment equipment with strong technical force and abundant talent staff. We are air dryer OEM manufacturer of KOBELCO. The purification drying machine we developed can be matched with different kinds of air compressors, providing high quality air without water, oil and dust. CE,QS,ISO9001 certificated. Rich production experiences plus strict quality control mangement, our products have been exported to America and Europe,etc, widely approved and praised.

News

Subscribe to EP newsletter