Specifications
Chemical powder screw conveyor
1.Convenient to maintain
2.Impact structure and good price
3.Professional manufacturer
4.ISO
Chemical powder screw conveyor with CE&ISO
Summarize
Screw conveyor is the use of screw rotation and continuous conveying of materials equipment, apply to transport, grain, cement, fertilizer, flour ash, sand, small stones, pulverized coal, lump coal and other materials. Due to the effective flow area is small in the body and screw conveyor should not transport perishable materials, viscosity is too large, easy to agglomerate.
Screw conveyor can be decorated horizontal or inclined conveyor form GX (Angle less than 200, LS is less than 150) if you require any transportation, should make a special order. Working environment temperature range GX - 20 ~ 50 °C, the LS - 20 ~ 80 °C,GX conveying material temperature below 200 °C, the LS - 20 ~ 80 °C.
Screw conveyor according to the structure is divided into head, middle and tail three parts, each part and there are several kinds of different length, according to the pilot choose compostable 3 m - 70 - m, LS type single drive 3.5 m to 40 m (oversize maximum 40 meters) long, LS type double drive 4 meters to 80 meters (oversize maximum 40 meters long) of the whole screw machine. Every length of 0.5 meters for a specification.
Technical parameters
model | G×150 | G×200 | G×250 | G×300 | G×400 | G×500 | G×600 |
Diameter(mm) | 150 | 200 | 250 | 300 | 400 | 500 | 600 |
[N/n](kw/r.p.m) | 0.013 | 0.030 | 0.060 | 0.100 | 0.250 | 0.480 | 0.850 |
[P](kg) | 210 | 370 | 580 | 800 | 1500 | 2400 | 3500 |
standard speed | N=23,35,43,59,41,71,87rotate/min |
Note: According to different demands of customers, our company can manufacture vibrating screen with different specifications and vibrating modes.
Service Promise
Before-sale services: We guide customers to choose the best applicable device type and provide the advanced, energy-saving and practical technological process, and also we are responsible for the site planning and design.
On-sale services: products must be inspected strictly before sell, customers are invited to simulate and test machine on-the-spot and raise objections. We will organize delivery according to the clauses stipulated in the contract.
After-sale services: Our Company will send professional engineers to guide installation, debugging and training operators until customers are fully satisfied. Moreover, we can design and manufacture products according to customers’ specific requirement.
