Sorry, the search criteria can not be empty
Search

Tektronix DPO4104 1 GHz Digital Oscilloscope 1 GHz, 5 GS/s by Advanced Test Equipment Rentals

  • Item Condition:
  • Brand:
  • Model#:
  • Location:
  • Price:
Advanced Test Equipment Rentals
1-858-558-6500


Contact the seller Add to Inquiry Cart

Product Description

Offering up to 1 GHz bandwidth and 5 GS/s sample rate, the Tektronix DPO4104 1 GHz Digital Oscilloscope 1 GHz, 5 GS/s delivers the performance you need to see fast-changing signal details. With as many as 20 channels, you can analyze analog and digital signals with a single instrument. Combine that with automated serial and parallel bus analysis, innovative Wave Inspector® controls, and automated power measurements, and the DPO4104 provides the feature-rich tools you need to simplify and speed debug of your complex design.

Features:

  • 1 GHz, 500, 350 MHz Bandwidth Models

  • 2 and 4 Channel Models

  • Sample Rates Up to 5 GS/s on All Channels

  • 10 Megasample Record Length on All Channels

  • Wave Inspector Controls Provide Unprecedented
    Efficiency in Waveform Analysis

  • I2C, SPI, CAN Serial Triggering and Analysis

  • 10.4 in. (264 mm) XGA Color Display

  • Small Footprint and Lightweight – Only 5.4 in.
    (137 mm) Deep and 11 lbs. (5 kg)

  • USB and CompactFlash on Front Panel for Quick
    and Easy Storage

  • Built-in Ethernet Port

  • Plug ‘n’ Play Connectivity and Analysis
    Software Solutions

  • USB 2.0 Device Port for Direct PC Control of
    Oscilloscope Using USBTMC

  • Suite of Advanced Triggers

  • e*Scope® Remote Viewing and Control

  • Interoperability with Tektronix Logic Analyzers

  • TekVPI™ Probe Interface Supports Active,
    Differential and Current Probes for Automatic
    Scaling and Units



Applications:

  • Embedded Design and Debug

  • Investigation of Transient Phenomena

  • Power Measurements

  • Video Design and Debug

  • Spectral Analysis

  • Automotive Electronics Design and Debug

  • Manufacturing Test and Quality Control

  • Electro-mechanical Design and Analysis

  • Bio-medical Product Development

  • Industrial Control



Vertical System

Input Channels4
Analog Bandwidth (–3 dB)1 GHz
Calculated Rise Time350 ps
Hardware Bandwidth Limits20 MHz or 250 MHz
Input CouplingAC, DC, GND
Input Impedance1 MΩ ±1%, 50 Ω ±1%
Input Sensitivity, 1 MΩ1 mV/div to 10 V/div
Input Sensitivity, 50 Ω1 mV/div to 1 V/div
Vertical Resolution8 bits
Max Input Voltage, 1 MΩ250 VRMS with peaks ≤±400 V
Max Input Voltage, 50 Ω5 VRMS with peaks ≤±20 V
DC Gain Accuracy±1.5% with offset set to 0 V
Offset Range1 mV/div to 50 mV/div ±1 V
50.5 mV/div to 99.5 mV/div ±0.5 V
100 mV/div to 500 mV/div ±10 V
505 mV/div to 995 mV/div ±5 V
1 V/div to 5 V/div ±100 V
5.05 V/div to 10 V/div ±50 V
Channel-to-Channel Isolation≥100:1 at ≤100 MHz and ≥30:1 at >100 MHz up to the rated bandwidth
(Any Two Channels at Equal Vertical Scale)


Horizontal System

Maximum Sample Rate (all channels)5 GS/s
Maximum Record Length (all channels)10 M points
Maximum Duration at Highest Sample Rate (all channels)2 ms
Timebase Range (s/div)400 ps to 1,000 s
Timebase Delay Time Range–10 divisions to 50 s
Channel-to-channel Deskew Range±100 ns
Long Term Sample Rate and Delay Time Accuracy
±5 ppm over any ≥1 ms interval
Delta Time Measurement Accuracy±(1/sample rate + 5 ppm x |Reading| + 0.4 ns)


Item added to Inquiry Cart

Continue shopping Go to Inquiry Cart