Sorry, the search criteria can not be empty
Search

LN1000M2 Low Noise Preamplifier 10KHz-1000MHz 11dBm 30dB Ga by Kandel Electronics, Inc.

  • Item Condition:
  • Brand:
  • Model#:
  • Location:
  • Price:
Kandel Electronics, Inc.
215-886-7008


Contact the seller Add to Inquiry Cart

Product Description

Product Description & Specs

The Model LN1000M2 is a broadband, linear pre-amplifier for laboratory applications requiring instantaneous bandwidth and low noise.
It is useful for amplifying low level signals to more useful levels for driving power amplifiers and other similar applications. In addition, with its low noise figure it can be used to increase the dynamic range and sensitivity of receivers with relatively high noise figures. This can prove to be useful with systems such as the EMSCAN unit.
SPECIFICATIONS
FREQUENCY RESPONSE: 10 kHz -1000 MHz
POWER OUTPUT: ?1l dBm at less than 1 dB gain compression
INPUT FOR RATED OUTPUT: -18 dBm maximum
GAIN: 30 dB minimum
GAIN FLATNESS: ?1.5 dB
NOISE FIGURE: 3.5 dB typical: 4.5 dB maximum(2 -1000 MHz)
INPUT IMPEDANCE: 50 ohm. VSWR 2.5:1 maximum
OUTPUT IMPEDANCE: 50 ohms, VSWR 2.0:1 maximum
MISMATCH TOLERANCE: 100%, will operate without damage, foldlback or oscillation with any magnitude and phase of source and load impedance.
MODULATION CAPABILITY: will faithfully reproduce AM, FM or pulse modulation appearing on the input signal.
HARMONIC DISTORTION: -20 dBc maximum at +11dBm output
THIDR ORDER INTERCEPT POINT: +21 dBm typuical
PRIMARY POWER: 120/240 VAC, 50/60 Hz
R F CONNECTORS: Type BNC female
WEIGIIT: 24 oz(.6.8 kg)
SIZE: 12.7 x 5.1 x 3.8cm; 5.2 x 1.5 inches


Item added to Inquiry Cart

Continue shopping Go to Inquiry Cart