Two-Channel CW Laser Diode Driver features MCU interface

12/23/2014 23:18:02

Supplied in 5 x 5 mm, 28-pin QFN package and operating from 2.8–8 V supply, iC-HT permits MCU-based activation of laser diodes in CW mode. Laser diodes can be driven by optical output power using APC; laser diode current using ACC; or full, controller-based power control unit. Max laser diode current per channel is 750 mA, and both channels can be switched in parallel for laser diode currents up to 1.5 A. Also, current limit can be configured for each channel. ... ...

Read More

Tube and Pipe Bender includes quick-change tooling

12/23/2014 23:17:49

Designed to accept large radius tooling to 15¾ in. CLR, Giga Bender Mandrel Model GB90 can bend tube, pipe, square, and rectangular profiles to center line radius as tight as 1D. Users can program multiple bend angles to 180° with independent material spring back setting for each bend. Available with up to 6-axis NC control, machine includes USB port for unlimited program memory storage, touchscreen display with ABS or INC modes, multiple language capability, and system diagnostics. ... ...

Read More

Tunable DWDM SFP Transceiver features mechanical locking

12/23/2014 23:17:42

Supporting multi-data rate up to 10G, MLT (Mechanically Locked Tunable) DWDM SFP transceiver (TRx) leverages Chirped Fiber Bragg Grating and athermal structure technology. It can be tuned to desired wavelength via electro-mechanic tuner by typing in wavelength number on panel of tuner. While wavelength is mechanically locked for end of transceiver life, wavelength can be repeatedly re-tuned at different wavelengths if necessary to accommodate network performance or operational adjustments. ... ...

Read More

Turning Inserts handle hard alloys

12/23/2014 23:17:42

With PVD coating technology, Beyond(TM) Grades optimize machining in high-temperature materials. Model KCU10(TM) is specifically engineered for OD and ID turning, grooving, plunging, undercutting, and threading, while Model KCU25(TM) covers threading, grooving, and cutoff. Model KCU10 additionally features dual-layer coating application: top layer of AlSiTiN atop second layer of AlTiN. Boundary between layers helps deflect micro-cracks. ... ...

Read More

Turbine Low Flow Sensors include molded mounting tee

12/23/2014 23:17:39

Designed for 1, 1½, and 2 in. pipe systems, FSI-T00 Series is constructed with 4-bladed HDPE impeller, Type 1 PVC sensor housing, tungsten carbide impeller shaft, and Buna-N O-ring. Units deliver square wave digital signal output proportional to flow that will travel up to 2,000 ft without amplification. Equipped with threaded retaining nut for servicing, sensors are suited for water treatment systems, water dispensing, cooling loops, irrigation systems, and large scale aquariums. ... ...

Read More

Tube Magnets remove ferrous contamination from products

12/23/2014 23:17:38

Constructed of 316L stainless steel with glass bead surface finish, ProGrade® Tube Magnets are available in Ceramic, Rare Earth, and Xtreme® Rare Earth magnet strengths, enabling customer to choose ideal level of protection for application. Portable units are suitable for removing ferrous contaminants from liquids in tanks and as quality control check of dry bulk materials. Measuring 1 in. in diameter, magnets come in lengths from 4–24 in. with ¼ x 20 tapped ends. ... ...

Read More

Tube Laser System accepts raw tubes to 24 ft

12/23/2014 23:17:35

Equipped with 1,000 W fiber laser, Model LT2012 processes small round tubes from 1/8–3 in. diameter, and square and rectangular tubes to 2 x 2 in. System is capable of cutting mild steel, stainless, aluminum, or copper. LT2012 can produce completed parts in one process – end profiles and internal features are cut in one pass. With touchscreen interface and magazine style in-feed, machine can handle quantities ranging from a few parts to tens of thousands of parts. ... ...

Read More

Tunnel Construction Software connects field and office

12/23/2014 23:17:34

Trimble Connected Site® suite is integrated office-to-field solution that allows contractors to perform tunnel construction while monitoring progress in real-time. Software allows tunneling personnel in field to compare 3D tunnel design with as-built tunnel after every blast round. It can be used for all measurement and stakeout operations inside and outside tunnel including rock bolts, cable and ductwork, tunnel floor and wall measurements, and drainage or utility information. ... ...

Read More

Tube Honing Machine offers stock removal rate of 200+ in.³/hr

12/23/2014 23:17:31

Suited for oil and gas industry, Model HTG-10000 accommodates standard parts up to 30 ft long with 2-24 in. ID and up to 26 in. OD standard, or up to 48 in. as option. Machine features 100 fpm max stroke velocity, 0-300 rpm spindle, and tool feed force of up to 2,500 lb. Hydraulic feed system provides servo position control of feed system actuator, electronic pressure control, closed loop feedback, and ability to operate both standard and 2-stage tooling. ... ...

Read More

Tube Expander Fittings serve conveyor applications

12/23/2014 23:17:27

Series AN 350 Tube Expander Fittings are comprised of metric-sized, RoHS-compliant fittings made of black reinforced polyamide plastic with nickel-plated brass bushings. Designed for 25 mm OD x 1.5 mm wall thickness square tubing, products are available with M8 x 1.25 or M10 x 2.5 threads. Typical applications include bracing conveyor walls to mount chain return components. ... ...

Read More