-
News
-
Subscribe to EP newsletter
New Test & Measurement DealersSelect All
-
- Buy
- Sell
- Industry Directory
- Apps
|
|||
 |
 |
||
40AD1 Amplifier DC - 1MHz 40 Wattts CW by Kandel Electronics Inc
- Item Condition:
- Brand:
- Model#:
- Location:
- Price:
Product Description
Product Description & Specs
The Model 40AD1 amplifier is a self-contained, broadband unit designed for laboratory applications where instantaneous bandwidth, high gain and moderate power output are required. Utilization of push-pull MOSFET circuitry lowers distortion, improves stability and allows operation into any load impedance without damage. The Model 40AD1, when used with an RF sweep generator will provide a minimum of 40 watts of swept power. The Model 40AD1 is direct coupled throughout, allowing very low frequency signals to be used. Included is a front panel gain control which permits the operator to conveniently set the desired output level. Housed in a stylish, contemporary enclosure, the Model 40AD1 provides available RF power for typical applications such as RF susceptibility testing, antenna and component testing, watt meter calibration, and use as a driver for high power amplifiers. The Model 40AD1 amplifier uses universal input line voltage switching power supplies, thus allowing its use over a wide range of input voltages without wiring or switch position changes.
SPECIFICATIONS
POWER OUTPUT, CW: Minimum 40 watts; Typical 50 watts; Linear @ 1dB compression 25 watts minimum
FLATNESS: ?1.5 dB max.
FREQUENCY RESPONSE: DC - 1MHz instantaneously
INPUT FOR RATED OUTPUT: 1.0 milliwatt maximum
GAIN (at maximum setting): 45 dB minimum
GAIN ADJUSTMENT (continuous range): 18 dB minimum
INPUT IMPEDANCE: 50 ohms, VSWR 1.5:1 max.
OUTPUT IMPEDANCE: 50 ohms, VSWR 2.0:1 max.
MISMATCH TOLERANCE: 100% of rated power without foldback. Will operate
without damage or oscillation with any magnitude and phase of source and load impedance.
MODULATION CAPABILITY: Will faithfully reproduce AM, FM, or pulse modulation appearing on the input signal
HARMONIC DISTORTION: Maximum at 25 watts output, -25 dBc
THIRD ORDER INTERCEPT POINT: 54 dBm, typical
PRIMARY POWER: 90 - 135 / 180 - 270 VAC 50/60Hz single phase autoranging 400 watts maximum.
Similar Products
|
|
|
Condition : USED
Model#: 40AD1
Location:
United States
|
|
|
Condition : USED
Model#: 40AD1
Location:
United States
|
|
|
Model#: Elx405 Select CW
Location:
San Diego, California, USA
|
|
|
Model#: Elx405 Select CW
Location:
San Diego, California, USA
|
|
|
Condition : USED
Model#: WS-III 40
Location:
United States
|
|
|
Condition : USED
Model#: 40
Location:
United States
|
|
|
Condition : USED
Model#: 40
Location:
United States
|
|
|
Condition : Seller Refurbished
Model#: 10S1G4A
Location:
|
|
|
Condition : NEW
Model#: 66300 Series - 40 - 100 W
Location:
United States
|
|
|
Condition : NEW
Model#: 40T26G40A
Location:
United States
|
|
|
Condition : USED
Model#: 40S1G4
Location:
United States
|
|
|
Condition : USED
Model#: 40S4G11
Location:
United States
|
|
|
Condition : USED
Model#: 40S4G18
Location:
United States
|
|
|
Condition : USED
Model#: 40S6G18A
Location:
United States
|
|
|
Condition : USED
Model#: 40T26G40A
Location:
United States
|
|
|
Condition : NEW
Model#: SD-72 L DC V
Location:
China